The phase (timing) adjustment required by the attached sensor.
This value is ignored if member model
is CTid
.
The format of this string is a colon-separated list of phase- and
amplitude-level pairs of the form p@l
, where p
is the
phase-adjustment in degrees at 60Hz, and l
is a percentage of
the sensor's full scale value. For example, for a 100A current
sensor, the phase string 1@1:0.75@50
would indicate that the
phase needs to be adjusted by 1 degree at 1A and by 0.75 degrees
at 50A.
Normal response.
Unauthorized response.
{- "result": "2.59@3:2.34@6:2.06@15:1.89@100",
- "error": "Error message (present if an error occurred)."
}
The phase (timing) adjustment required by the attached sensor.
This value is ignored if member model
is CTid
.
The format of this string is a colon-separated list of phase- and
amplitude-level pairs of the form p@l
, where p
is the
phase-adjustment in degrees at 60Hz, and l
is a percentage of
the sensor's full scale value. For example, for a 100A current
sensor, the phase string 1@1:0.75@50
would indicate that the
phase needs to be adjusted by 1 degree at 1A and by 0.75 degrees
at 50A.
Normal response.
Unauthorized response.
"2.59@3:2.34@6:2.06@15:1.89@100"
{- "status": "OK",
- "error": "Error message (present if an error occurred)."
}
The phase (timing) adjustment required by the attached sensor.
This value is ignored if member model
is CTid
.
The format of this string is a colon-separated list of phase- and
amplitude-level pairs of the form p@l
, where p
is the
phase-adjustment in degrees at 60Hz, and l
is a percentage of
the sensor's full scale value. For example, for a 100A current
sensor, the phase string 1@1:0.75@50
would indicate that the
phase needs to be adjusted by 1 degree at 1A and by 0.75 degrees
at 50A.
Normal response.
Unauthorized response.
"2.59@3:2.34@6:2.06@15:1.89@100"
{- "status": "OK",
- "error": "Error message (present if an error occurred)."
}
Reset to empty string.
Normal response.
Unauthorized response.
{- "status": "OK",
- "error": "Error message (present if an error occurred)."
}